PLA Filament
Items for sale: 34
Price range: £8.99 - £29.99
Last updated: Sun Aug 10 14:10:44 BST 2025
ANYCUBIC PLA Filament 1.75mm, 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 1KG Spool
- 【Accuracy and Consistency】 Anycubic 3D Printer PLA filament of 1.75mm diameter, minimum dimensional tolerance +/- 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- 【Neat Spool and Premium Quality】 The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
- 【Clog-Free and Bubble-free】 Designed and Manufactured with a Clog-Free to ensure a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
- 【Wide Compatibility】 Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and even does not need a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market
- 【Filament Installation】 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk
JAYO PLA+ Filament 1.75mm, PLA Plus 3D Printer Filament 1.1KG, Neatly Wound Filament, Dimensional Accuracy +/- 0.02 mm, 1.1 KG Spool(2.42 LBS), 363 Meters, Black
- 【JAYO PLA+ 3D Filament 1.75mm】PLA PLUS filament is 10 times stronger than normal PLA Filament, but as easy to use as PLA. PLA+ filament's better toughness, higher strength, lower warping and brighter color can make the printing result better.
- 【Neatly wound filament】JAYO's leading production process - neatly lined up filament can avoid filament tangling, twisting or breaking during the printing process, reducing the risk of clogging and greatly increasing the printing success.
- 【1.75mm Filament Diameter】JAYO PLA Plus 3D printer filament has 1.75 mm diameter, dimensional accuracy +/- 0.02 mm, accurate diameter making it suitable for almost FDM 3D printers.
- 【Clog-Free & Bubble-Free】JAYO PLA+ 1.75mm filament has better flowability, which effectively reduces clogging during printing. The plastic vacuum packaging and desiccant make filament less susceptible to moisture.
- 【PLA+ Recommend Settings】We recommend printing the PLA+ filament at a nozzle temperature of 210-235°C (410-455°F), bed temperature of 55-65°C (131-149°F), printing speed of 50-100mm/s.
TINMORRY PLA Filament 1.75mm Combipack, 3D Printer Filament, 250g x 5 Spools, Black+White+Red+Blue+Green
- Tips: 1. Recommend printing temperature 195-225°C, build platform 60-75°C. 2. If the indoor temperature is too low, it is recommended to increase the temperature of the hotbed or use glue to prevent warping.
- High-Speed Printing: Support high-speed printing up to 300 mm/s, which is 3-5 times faster than other brands of PLA filaments. It's easy to obtain high-quality prints with a uniform surface even at high-speed printing.
- Premium Quality: TINMORRY PLA 3D printing filament, crafted from high-quality polylactic acid, is an ideal choice for 3D printing beginners. It is easy to use, exhibits low warping and shrinkage, and emits no odor during the printing process, resulting in a superior surface finish and ultra-high dimensional accuracy.
- Less prone to tangling and clogging: With a diameter of 1.75±0.03mm, TINMORRY PLA filament is completely mechanically wound and strictly inspected manually to ensure clean winding and easy feeding. Made from renewable resources, our PLA 3D Printer Filament is eco-friendly 3D printing material.
- Wide Compatibility: TINMORRY Rapid PLA filament is compatible with most 1.75mm FDM 3D printers on the market and perfectly fits Bambu Lab / Creality K1, K2 / QIDI/FLASHFORGE Adventurer 5M / Prusa MK4 / ANYCUBIC Kobra / AnkerMake M5 FDM 3D printers, etc. If you have any questions while using TINMORRY filament, please contact us to get the filament profile or download from GitHub.
ELEGOO PLA+ Filament 1.75mm White 1KG, PLA Plus Tougher and Stronger 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 1kg Cardboard Spool(2.2lbs) Fits for Most FDM 3D Printers
- 【Higher Toughness & Impact Strength】Toughness and impact strength of ELEGOO PLA Plus is apparently enhanced. It's also low warpage and shrinkage, bringing excellent results for printing functional parts or other projects
- 【Less-tangle & Neatly Wound】Full mechanical winding and strict manual inspection ensures that all pla+ filaments are neatly wound, which effectively reduces tangles, snap and line breakage issues
- 【Top-Notch Accuracy & Consistent】Precise production process guarantee ELEGOO PLA Plus filament of 1.75mm diameter, accuracy of +/- 0.02mm. Strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding for filaments
- 【Glossy Surface & Easy to Use】Accurate deposition and strong layer bonding bring a smoother surface finish without layer delamination issues. The lower printing temperature make it very easy to print with excellent print quality
- 【No Clogging & No Bubbles】Complete dried before packing and well vacuum sealed protect the filaments from moisture and dust,no clogging and bubbling. Perfectly compatible with most 1.75mm FDM 3D printers on the market
Creality PLA Filament 1.75mm PLA 3D Printer Filament, 2kg Cardboard Spool (4.4lbs), Dimensional Accuracy +/- 0.03mm, Fit Most DIY Printer (2 Packs) (White)
- 🤗 COST-EFFECTIVE VALUE PACL EVER - This value pack is the most cost-effective filament we release in 2023, the color is classic black and white, you can have 2 spools now just with one spool's money now! And you can just print whatever you want. Saving money but not inspirations!
- 🤗 CLOG-FREE & BUBBLE-FREE - Designed and manufactured with clog-free patent to guarantee a smooth and stable printing experience with these PLA refills. Complete drying for 24 hours before packaging and vacuum sealed with desiccants in PC bag.
- 🤗 LESS-TANGLE & STRONGER TOUGHNESS - Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother. The Imported raw material upgrades with stronger toughness. It is not easy to break, meeting your demands for printing projects of functional parts with higher toughnes.
- 🤗 DIMENSIONAL ACCURACY & CONSISTENCY - Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, dimensional accuracy + / - 0.03 mm; 2 kg spool (4.4lbs).
- 🤗 HIGH COMPATIBILITY &100% ENVIRONMENTAL-FRIENDLY - Compatible with 99% FDM & FFF 3D printers (with heated beds) 3D Pen. Environmental protection, made from starch raw materials derived from renewable plant resources.
TECBEARS Silk PLA Filament 1.75mm, Dual Colors Coextrusion Silky 3D Printer Filament, Shiny Multicolor Change, Fit Most FDM 3D Printers, Accuracy +/- 0.02mm, 1KG Spool(2.2lbs), Blue Red
- 【Dual Colors Silk PLA】Every inch of TECBEARS dual colors filament is made of two colors, which produces an amazing two-color change effect when printed. Different color performances can be observed from different angles.
- 【Silky Texture, Smooth Surface】The silk texture creates a smooth, lustrous surface, giving your model a polished look without the need for post-processing. It is very suitable for arts and crafts.
- 【Easy to Print】Each roll of filament is neatly wound to prevent tangling and feeding problems. The diameter tolerance is +/- 0.02mm. Low shrinkage ensures your prints will not tear or bend. It is also very friendly to beginners.
- 【Vacuum Packed】PLA filaments are meticulously dried for 24 hours and vacuum sealed in resealable packaging. Ensure your filaments remain in optimal condition throughout storage and use.
- 【Recommend Printing Settings】We recommend your heated bed temperature: 50-60°C, printing temperature range: 205-230℃, printing speed: 50-200mm/s. Universally compatible with most FDM 3D printers and 3D pens
- 【Service & Warranty】All filaments come with a quality guarantee and manual technical support.If you have any questions about the printing process, please feel free to contact us and we will be happy to assist you and ensure a quality solution.
ERYONE Matte PLA Filament 1.75mm, 3D Printer PLA Matte Filament, +/-0.03mm, 1kg(2.2lbs)/Spool, Matte Olive Green
- Matte effect: Matte filaments can output prints with lackluster colour and frosted texture. The surface is incredibly matte, which helps hide the individual layers of your print.
- Very accurate matte PLA: the diameter of the filament is 1.75 mm, with a tolerance of +/-0.03 mm, it flows smoothly and consistently without clogging the nozzle or extruder
- Tangle-free matte filament: perfectly wrapped matte mixed PLA. It is tangle-free when unopened. No stringing and warping. Universally compatible with a wide range of FDM 3D printers on the market. Universal compatibility with various FDM 3D printers in the market
- Strong layer adhesion: Provide excellent print quality without odour and low deformation during printing. The density of the 1.75 mm matte PLA filament is about 1.24 g/cm3, no bubbles, strong layer adhesion.
- N.W: 1kg, G.W: 1.35kg, spool inner diameter 57mm, spool outer diameter 200mm, height 64mm.
ELEGOO Rapid PLA Plus Filament 1.75mm Grey 1KG, PLA+ 3D Printer Filament Up to 600 mm/s High Speed Printing, Dimensional Accuracy +/- 0.02 mm, 1kg Cardboard Spool(2.2lbs)
- 【600mm/s Printing Speed】With enhanced fluidity, ELEGOO RAPID PLA+ filament melts rapidly and flows smoothly, allowing for up to 600mm/s fast printing speed. You can complete the projects quickly without compromising on quality
- 【Enhanced Strength & Toughness】ELEGOO RAPID PLA plus filament features higher impact strength than regular pla, which makes it resistant to brittleness and cracking, bringing excellent results for printing projects
- 【Less-tangle & Neatly Wound】Full mechanical winding and strict manual inspection ensures that all high-speed pla plus filaments are neatly wound, which effectively reduces tangles, snaps and breakage issues
- 【Top-Notch Accuracy & Consistent】Precise production process guarantee the filament of 1.75mm diameter, accuracy of +/- 0.02mm. Strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding for filaments
- 【Fit For Most 3D Printer】Rapid PLA+ filament fit for both regular printers and high speed printers, perfectly for most high speed printer such as Neptune 4 series, K1 sereis, Ender 3 series, Kobra series, Adventurer series and more
SUNLU PLA+ 3D Printer Filament, 1.75mm, Enhanced Toughness, +/- 0.02mm Accuracy, 1kg Spool (2.2LBS), Transparent Orange
- ①【SUNLU 3D PLA+ Filament】SUNLU PLA plus has higher toughness than normal PLA. Say goodbye to brittle filament. SUNLU PLA+ filament has high strength, excellent adhesion, lower shrinkage, no bubbling, no clogging.
- ②【Clarity and Transparency】SUNLU PLA+ Transparent 3D printer filament provides a clear, transparent, or semi-transparent printing effect ideal for creating highly transparent parts like casings, lampshades, eyeglasses, and display screen protectors during 3D printing.
- ③【Neatly Arranged Lines】SUNLU's neatly arranged filament technology can avoid winding, twisting or disconnection of filaments during printing, reduce the risk of 3D printing plugs, and make your printing smoother.
- ④【Clog-Free, Bubble-Free】Better flow of SUNLU 1.75mm PLA+ filament will no longer clog the bed probes of 3D FDM printers. PLA PLUS filament has no impurities, no bubbles, and the printing process is smooth, making it possible to print glossy 3D printing.
- ⑤【High Precision +/- 0.03mm】PLA+ 3d printer filament has 1.75 mm diameter, Accuracy +/- 0.02 mm; 1 kg spool (2.2lbs). It has very tight diameter tolerance and perfect roundness, minimal warping. Increase your 3d printing objects delicacy.
- ⑥【High Compatiblity & Vacuum Pack】Compatible with 99% FDM 3D printers and 3D pen. SUNLU PLA PLA PLUS filament's vacuum packed provide better printing result. PLA+ filament is made from starch raw materials derived from renewable plant resources.
LANDU Silk Tri-Color PLA Filament 1.75mm 1Kg, Triple Color Silk PLA Filament, Rainbow PLA Filament, Neatly Wound 3D Printer Filament, 3 in 1 Multi Color Filament +/-0.02mm, Red Blue Green
- Tri-color Design: The silk PLA combines three colors into a single filament, resulting in a unique multicolor effect in the printed object. The vibrant and contrasting colors create a striking visual impact, offering more creativity and aesthetic appeal from different viewing angles.
- Silky Glossy Finish: The silk texture delivers a smooth, glossy surface, giving the model a polished look without the need for post-processing. It's perfect for high-quality displays and decorative projects.
- Clog-free and Low Stringing: This PLA is precisely manufactured to ensure that no clogging occurs during printing, minimizing stringing and ensuring a smooth printing process. It's ideal for long-duration prints and complex models, ensuring consistent high-quality results.
- Tangle-free Winding: The silk PLA is wound in a neat and orderly manner, preventing knots or uneven winding during printing. This ensures smooth feeding of the filament, reducing the risk of print interruptions or errors due to poor winding.
- High Precision and Stability: With a diameter tolerance of less than ±0.02mm, the silk PLA ensures smooth and stable filament flow during printing. It delivers clear details, strong layer adhesion, and a smooth, even surface for excellent print quality.
eSUN PLA Filament 1.75mm, PLA Basic Dimensional Accuracy +/- 0.05mm, 1KG Spool (2.2 LBS) Speedy Filament for 3D Printers,Black
- 【PLA Basic Filament】: eSUN PLA Basic, improved based on ordinary PLA, not only retains the environmental-friendly characteristics, but also add special materials to strengthen its fluidity and fast printing performance, which makes it an ideal choice of cost-effective rapid printing consumables.
- 【High Compatibility】: eSUN PLA Basic filament, with excellent speedy printing performance, can be compatible with high speed printers, such as such as AnkerMake M5, Bambu Lab X1/ P1P, K1/K1 MAX, Flsun V400, Raise3D Pro3/ RMF500, etc. And it can be used in cultural creativity, animation industry, film and television props, etc.
- 【Easy to Print】: Compared with ordinary PLA filament, eSUN PLA Basic has higher precision, no warping, less brittle and not easy to break. And it melts well, feeds smoothly and constantly without clogging the nozzle or extruder, thus assuring high printing successful rate and better forming effect.
- 【Fast Cooling& Smooth Extrusion】: eSUN PLA Basic, with more balanced melting and cooling performance, has smoother flow in the molten state, and it can be cooled faster when printing and moulding. And it has high fluidity and low specific heat capacity, and excellent fluidity and controlled viscosity factor avoid excessive stringing and sagging.
- 【Vacuumed Sealed Packaging】: eSUN filament comes in a sealed vacuum bag with a desiccant bag, which can easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt.
SUNLU 3D Printer Filament PLA Matte 1.75mm, Neatly Wound Filament, Smooth Matte PLA Finish, Print with 99% FDM 3D Printers, 1kg Spool (2.2lbs), 330 Meters, Matte White
- ①【SUNLU 100% Wound Neatly 3D Filament】SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound 3D Printer Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency.
- ②【PLA Features & Matte Color】SUNLU's newly upgraded Matte PLA Filament colors retain the original SUNLU PLA advantages: Easy Printing, No Clogging, while adding more color options. Matte PLA can print prints with non-glossy colors and frosted textures, suitable for more premium and mysterious 3D models.
- ③【Stable Dimensional Tolerance】SUNLU PLA MATTE Filament Dimensional Accuracy +/- 0.03mm. Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, easy handling, resulting in an outstanding surface finish and are highly precise.
- ④【Recommend Settings】We recommend printing the PLA Matte Filament at nozzle temperature of 200-230°C, bed temperature of 50-65°C, and printing speed of 50-100mm/s. The length of the filament can reach about 330 Meters.
- ⑤【No Odor & No Bubbles】SUNLU 3D Printer Filament are mainly made of corn starch, which is odorless when printing. Vacuum sealed, there is also a desiccant package, vacuum packaging to avoid dust and keep the filament dry.
- ⑥【Easy to Use】SUNLU is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to SUNLU 3D filament cost-effective and reliable for 99% FDM 3D printers.
- ⑦【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
- ⑧【Vacuum Packaging】SUNLU 3D printer filaments are vacuum sealed and come with a desiccant bag. Ensure that the filament does not absorb moisture before unpacking and maintain its quality.
- ⑨【Colorful Printing Options】SUNLU PLA Matte filament has bright colors and good transparency, and the printed surface is glossy. A variety of colors meet your different printing needs.
- ⑩【Professional after-sales team】SUNLU, founded in 2013, is a high-tech enterprise specializing in R&D, production and sales of 3D printing filament, filament dryer box, 3D pen and 3D resin etc.
eSUN PLA Filament 1.75mm, 3D Printer Filament PLA Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Materials for Most FDM 3D Printers,Fire Engine Red
- 【eSun PLA 3D Printer Filament】 eSUN PLA Lite, as a cost-effective filament, keeps all the advantages of PLA: easy to print, excellent layer bonding, low shrinkage, no cracking, high toughness and not easy to break, which is an ideal choice for both entry-level 3D printing amateurs and professionals.
- 【Stable Dimensional Tolerance】eSUN PLA Lite is designed with minimum tolerance and low warping to ensure consistent feeding and stable prints. It enables printed model to be more durable, less stringing, no bubbles, no deformation and easy handling, which can offer you an outstanding surface finish and a high precision.
- 【High Compatibility】eSUN PLA Lite is compatible with Most of FDM 3D Printers, such as: Raise3D, Prusa, Voron, Creality 3D, Bambu Lab, etc. And it is widly used in accessory, art & craft, home decoration, toy, sculpture, shell and COSPLAY. We recommend extrusion / nozzle temperature at 190-230℃, bed Temperature at 45-60℃.
- 【Tangle Free & No Plugging】eSUN PLA Lite, as full 1KG 3D printer filament reel, has perfect roundness, tight diameter tolerance and good winding, thus it does not overlap or tangle. And it melts well, feeds smoothly and constantly without clogging the nozzle or extruder to ensure a high printing successful rate.
- 【Environmentally Friendly Packaging】 eSUN PLA Lite is designed with cardboard spool packaging, which is lightweight and recyclable to better protect the environment. And eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt.
ELEGOO Matte PLA Filament Beige 1KG, 1.75mm 3D Printer Filament Dimensional Accuracy +/- 0.02mm, 1kg Carboard Spool (2.2lbs) Fits for Most FDM 3D Printers
- BEAUTIFUL MATTE FINISH: ELEGOO MATTE PLA produce a beautiful matte, low gloss and smooth finish, resulting in a printed object with nearly invisible layer lines
- TOP-NOTCH ACCURACY & CONSISTENT: ELEGOO use advanced measurement procedures during manufacturing to guarantee all filament is 1.75 mm diameter, accuracy +/- 0.02 mm, ensuring consistency and precision in every print
- PERFECT WINDING FOR BETTER RESULT: Each spool of filament is neatly wound, which prevents tangles and feeding issues, giving out perfect printing results
- NO CLOGGING & NO BUBBLE: ELEGOO PLA Filament is manufactured in dry and dust-free environment and pack with vacuumed sealed package, away from any dampness or air, no clogging and bubbling problems
- FIT FOR MOST 3D PRINTERS: Universal compatibility with all the common 1.75 mm FDM 3D printers, such as Neptune series, Ender series, Kobra series, A1 series and more. If you use enclosed printer, please keep the door open when printing ELEGOO MATTE PLA
ANYCUBIC PLA+ 3D Printer Filament 1.75mm, High Toughness 3D Printing Filament, Dimensional Accuracy +/- 0.02mm, Print with Most FDM 3D Printers, Intelligent Identification，1KG Spool, Black
- 【High Toughness】Anycubic PLA Plus 3D Printer Filament is developed with high toughness and certain impact resistance, not easy to break when subjected to external force. At the same time prints smoothly with few layers, suitable for making models of handicrafts, artworks, engineering parts, and so on.
- 【High Dimensional Accuracy】The winding of Anycubic PLA Plus 3D Filament 1.75mm is tidy and maintains dimensional stability, with a controlled wire diameter tolerance of +/-0.02mm. Its high precision and minimal shrinkage work together to prevent cracks and warping.
- 【No Clogging, No bubbles】Without any clogging or bubbles, Anycubic PLA Plus Filament ensures a seamless extrusion of filament, resulting in a refined and consistent finish for the completed model.
- 【 Without Tangle Hassles】Anycubic 3D Printing PLA Plus Filament is without tangle hassles on the roll and easily left the spool without crossing turns which can result in less thread pulling and twisting, no clogging. Besides, it can easily lock the filament after use.
- 【High Compatibility】Ensuring compatibility with most of FDM 3D printers and 3D printing pens available in the market. Our vacuum packaging effectively shields against moisture and dust, ensuring an enhanced printing experience.
FLASHFORGE 3D Printer Filament Chameleon PLA Color Shift Filament 1.75mm, Changes Color with Light and Angles, 1KG Spool (2.2lbs), Dimensional Accuracy +/- 0.02mm for FDM 3D Printers (Burnt Titanium)
- 【Toughness PLA Filament】FLASHFORGE premium PLA filaments offer excellent ease of use, optimized printing quality, and minimal shrinkage. These filaments are perfect for your functional solidworks projects as they provide improved toughness and stability during printing.
- 【Clog-Free & Bubble-Free】Manufactured using clog-resistant methods to guarantee a seamless and steady printing experience with these PLA filaments. Thoroughly dried for 24 hours before packaging and vacuum sealed with desiccant to safeguard the filament from moisture and achieve precise printing.
- 【Tangle-Free and Easy for Using】Automatic winding with supplementary manual detection, to ensure that the line is tidy and less tangled to avoid possible snagging and line breakage. Additionally, FLASHFORGE PLA 1.75mm filament offers enhanced flowability and is compatible with 99% of FDM 3D printers available on the market.
- 【High Printing Performance】FLASHFORGE 3D printer filament 1.75mm PLA is designed to meet the needs of highly detailed printing and ensure a consistent color, dimensional accuracy, and no warping, no jamming, or layer delamination issues. It provides the best printing experience for 3D printing enthusiasts.
- 【After-sales Support】All flashforge 3d printer filaments are provided a two-month warranty and also a 30-day Money-back if you are not satisfied. We provide 24-hour online customer service, if you have any questions regarding product issues please feel free to contact us.
SUNLU High Speed PLA Filament 1.75mm, Up to 600mm/s Fast Printing, High Flow Speedy, Dimensional Accuracy +/- 0.02mm, 1KG White
- ①【30~600mm/s Print Faster】The epitome of SUNLU high speed 3d printer PLA filament innovation, designed to transform your printing journey form slow to fast. Revolutionize your printing experience with a colossal 500% surge in flowability. Ensures smooth printing without clogging or filament shortages even if speeds exceed 250mm/s.
- ②【Efficient Cooling Capability】High speed PLA filament benefit from a 180% boost in heat dissipation, enabling quicker cooling under the same conditions than normal PLA filament and preventing 3d printing material accumulation during fast prints. Improving printing speed while also ensuring accuracy and mechanical performance.
- ③【Notes on HS-PLA】 HS PLA Filament is temperature sensitive. Due to the different temperature control performance of different printers, please set the slicing parameters according to the recommended printing speed and temp matching parameters.If stringing occurs, pls try to reduce print temp appropriately.
- ④【Clog-Free and Bubble-Free】SUNLU 3d printer fast PLA filament consistent diameter tolerance 1.75mm ±0.02mm, ensuring tangle-free and knot-free. Rigorous 24-hour pre-packaging drying, plus vacuum-sealing, guarantees moisture-free printing, eliminating clogs and bubbles. Increase your printing success rate
- ⑤【Stable Dimensional Tolerance】SUNLU PLA high speed Filament Dimensional Accuracy +/- 0.02mm. Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, easy handling, resulting in an outstanding surface finish and are highly precise.
- ⑥【Easy to Use】SUNLU is capable of manufacturing all kinds of filaments in large scale with premium quality, which contribute to SUNLU 3D filament cost-effective and reliable for 99% FDM 3D printers.
- ⑦【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
- ⑧【Vacuum Packaging】SUNLU 3D printer filaments are vacuum sealed and come with a desiccant bag. Ensure that the filament does not absorb moisture before unpacking and maintain its quality.
- ⑨【Colorful Printing Options】SUNLU PLA high speed filament has bright colors and good transparency, and the printed surface is glossy. A variety of colors meet your different printing needs.
- ⑩【After Sales Guarantee】SUNLU, founded in 2013,is a high-tech company dedicated to research and development, production and sales of 3D printing filaments, 3D printers and various 3D printing materials such as PLA, PETG, 3d resin etc. We are committed to making ongoing and exceptional contributions to the 3D printing industry.
DEEPLEE PLA Filament 1.75mm for 3D Printers, Accuracy Tolerance +/- 0.02mm, Filament 3D Printing Materials Compatible with FDM Printer White 1kg
- 【Smooth Finish & Good Adhesion】 DEEPLEE PLA 3d filaments are made of high-quality polylactic acid, which has a smooth surface, even color, good adhesion and consistent printing quality, making it an ideal choice for creating models and figurines
- 【High Accuracy】DEEPLEE PLA 3d materials strictly control the wire diameter tolerance, with a accurate diameter of 1.75mm and a high dimensional accuracy of ±0.02 mm, ensuring consistent feeding, stable printing, and improve the success rate of printing
- 【Neatly Arranged】Each roll of DEEPLEE PLA is fully mechanical wound, coupled with strict manual inspection, the neat arrangment ensures stable and smooth wire feed. The cardboard roll design is easy to load and unload, and can be recycled
- 【Vacuum Package】The package is vacuum-sealed to ensure that the filaments are dust-proof and dry, effectively protecting the pla from moisture and air
- 【High Reliability & Wide Compatibility】DEEPLEE PLA filaments have been carefully configured and tested to work perfectly with most FDM 3d printers. It is the perfect choice for 3d printing
eSUN PLA+ Filament 1.75mm, Enhanced Toughness 3D Printer Filament PLA Plus, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Bone White
- 【Enhanced Toughness PLA+】PLA+ is an enhanced version of ordinary PLA. It has higher strength and better toughness, not easy to break. Made with starch raw materials derived from renewable plant resources, eco-friendly and non-toxic, no harm to to human and the environment.
- 【High Speed Printing】PLA+ meets the demands for high-speed printers and keeps outstanding performance at high speeds. And it also keeps all the advantages of PLA, easy to print, low shrinkage, no deformation, no cracking, high printing precision. Good layer bonding performance meets your demands for printing functional parts with higher toughness.
- 【Dimensional Tolerance +/- 0.03mm】eSUN PLA+ 3D printer filaments are produced with more precise specification. Minimum tolerance and low warping to ensure consistent feeding and stable prints, no bubbles, less stringing, extremely high printing successful rate.
- 【Tangle Free & No Plugging】Total Length: 340-350m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.
- 【High Compatibility】Compatible with Most of FDM 3D Printers, such as: Bambu Lab X1/X1C, Creality K1 /K1 MAX, AnkerMake M5, Prusa, MakerBot, UltiMaker, MK3, Ender 3, Flashforge, Raise3D, FLSUN V400, Voron 2.4. Widly used in machinery, electronic appliances, automobiles, decorations and COSPLAY.
- 【Vacuumed Sealed Packaging】Filament Net Weight: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
- Notice: PLA+ series will switch to cardboard spool, thus these two versions will be sent randomly recently.Sorry that the designation is not accepted.
ELEGOO PLA Filament 1.75mm Black 1KG, 3D Filament Dimensional Accuracy +/- 0.02mm, 1kg Cardboard Spool(2.2lbs) 3D Printing Filament Fits for Most FDM 3D Printers
- 【Top-Notch Accuracy & Consistent】ELEGOO use advanced measurement procedures during manufacturing to guarantee all filament is 1.75 mm diameter, accuracy +/- 0.02 mm, bringing consistent printing performance
- 【Perfect Winding for Better Result】Each spool of filament is neatly wound, which prevents tangles and feeding issues, giving out perfect printing results
- 【No Clogging & No Bubble】ELEGOO PLA Filament is manufactured in dry and dust-free environment and pack with vaccuumed sealed package, away from any dampness or air, no clogging and bubbling problems
- 【Eco-Friendly PLA Material】Made from renewable plant resource, PLA filament has lower melting temperature, minimal warping and low shrinking, odorless during printing and bio-friendly
- 【Fit for Most 3D Printer】Universal compatibility with most of the common 1.75mm FDM 3D printers, such as Neptune 2S, Neptune 3 Pro, Neptune 4 and more
Amazon Basics PLA 3D Printer Filament, 1.75 mm, Black, 1 kg per Spool
- 3D printer filament (1.75 mm diameter, black; 1 kg spool); designed to fit most common 3D printers (check spool size for compatibility)
- Made of PLA, a commonly used thermoplastic material known for its lower melting temperature and ease of use (no heated bed required), plus it's low-warp, odourless, and offers a glossy-type finish
- Engineered to reduce jamming
- Spool's built-in gauge shows percentage of material remaining and approximate length remaining
DEEPLEE PLA Plus 1.75mm Filament White 1kg, PLA+ 3D Printer Filament with Dimensional Accuracy +/- 0.02mm, Fits for Most FDM 3D Printers
- 【Stronger toughness】 DEEPLEE PLA+ 3d filaments has stronger toughness and better mechanical strength compared to PLA, providing more reliable printing results
- 【High Accuracy & Stable Printing】DEEPLEE PLA Plus filaments strictly control the wire diameter tolerance, with a accurate diameter of 1.75mm and a high dimensional accuracy of ± 0.02 mm, ensuring consistent feeding, improve the success rate of printing
- 【Neatly Arranged】Each roll of DEEPLEE PLA+ is fully mechanical wound, coupled with strict manual inspection, the neat arrangment ensures stable and smooth wire feed. The cardboard roll design is easy to load and unload, and can be recycled
- 【Vacuum Package】The package is vacuum-sealed to ensure that the filaments are dust-proof and dry, effectively protecting the pla from moisture and air
- 【High Reliability & Wide Compatibility】DEEPLEE PLA+ 3d filaments have been carefully configured and tested to work perfectly with most FDM 3d printers. With just a few simple steps, you can print solid and perfect models
JAYO PLA 1.75mm 1.1KG, Smooth 3D Printer Filament, +/- 0.02mm Accuracy, Neatly Wound, Fits Most FDM Printers, 1.1KG Spool (2.42 LBS), Black
- 【JAYO PLA Filament 1.75mm】JAYO 3D printer filament take advantage of advanced production technology that provides an incredible 3D printing experience. Neat lining up, high dimensional accuracy, low shrinkage and excellent adhesion make printing easier.
- 【Neatly Wound Filament】JAYO's leading production process - neatly lined up filament can avoid filament tangling, twisting or breaking during the printing process, reducing the risk of clogging and greatly increasing the printing success.
- 【1.75mm Filament Diameter】JAYO PLA 3D printer filament has 1.75mm diameter, dimensional accuracy +/- 0.02 mm, accurate diameter making it suitable for almost FDM 3D printers.
- 【Clog-Free & Bubble-Free】JAYO PLA 1.75mm filament has better flowability, which effectively reduces clogging during printing. The plastic vacuum packaging and desiccant make PLA filament less susceptible to moisture.
- 【PLA Recommended settings】We recommend printing PLA filament at a nozzle temperature of 200-210°C, bed temperature of 50-65°C, printing speed of 50-100mm/s. JAYO PLA filament's excellent stability are friendly to both beginners and advanced users.
ERYONE 1.75mm PLA Filament, +/-0.03mm, 1kg (2.2lbs)/Spool, Matte Multicoloured PLA, Rainbow Marble
- Matte Rainbow PLA filament: Distinctive multi-color Matte PLA filament, frosted gradient colors, 5-8 meters fast color change.
- Very accurate matte PLA: the diameter of the filament is 1.75 mm, with a tolerance of +/-0.03 mm, it flows smoothly and consistently without clogging the nozzle or extruder
- Tangle-free matte filament: perfectly wrapped matte mixed PLA. It is tangle-free when unopened. No stringing and warping. Universally compatible with a wide range of FDM 3D printers on the market. Universal compatibility with various FDM 3D printers in the market
- Strong layer adhesion: Provide excellent print quality without odour and low deformation during printing. The density of the 1.75 mm matte PLA filament is about 1.24 g/cm3, no bubbles, strong layer adhesion.
- Matte effect: Matte filaments can output prints with lackluster colour and frosted texture. The surface is incredibly matte, which helps hide the individual layers of your print.
XTZL3D PLA+ 3D Printer Filament, Co-Extruded Tri-Color (Red Blue Green), 1.75 mm 3-Color Silk Filament for Fast Printing, Compatible with Most FDM Printers, 1000 g (2.2 lbs) Accuracy +/-0.02 mm
- [Silk + tri-color combination]Unique three-color co-extruded color-changing filament, silk texture, smooth and shiny surface, the printed model can be seen in different colors from different angles, showing different silk-like features, so that your printing is no longer boring!
- [Suggested Printing Parameters]: Printing temperature 190 ° C - 230 ° C, heat bed temperature 40 ° C - 50 ° C, you can refer to the size of your print model size adjustments, even if it is a novice do not have to worry about the printing effect of a simple operation to get started.
- [Dimension & Specification]：We use advanced measurement control system to keep our filament with +/-0.02mm tolerance, 1.75mm diameter precision, 1kg silk filament, uniform delivery and smoother printing effect.
- [Compatible + Adaptable] Universally compatible with most common 1.75mm FDM 3D printers for Bambu Lab A1 mini/X1C and P1P/AnkerMake M5/Voron 2.4/Flsun V400/Creality K1/K1 Max and Ender 7/Raise 3D Pro 3 and RMF500......
- [Warranty and Service]Si tiene alguna pregunta sobre el filamento que nos compró, no dude en ponerse en contacto con nuestro equipo de servicio más profesional. Nuestro personal de servicio al cliente hará todo lo posible para proporcionar soluciones y ayudarle a eliminar el problema.
eSUN PLA Filament 1.75mm, ePLA-HS High Speed 3D Printer Filament Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) Speedy Fast Printing Filament for 3D High Speed Printers, Blue
- 【Rapid PLA】eSUN Rapid PLA filament has good balance of melting and cooling, it can flow smoothly in the molten state and cool quickly when printing and forming. Printing efficiency can be increased by 300% with high speed 3D printer. True high speed printing and fast cooling.
- 【High Compatibility】Rapid PLA filament is better compatible with High Speeding 3D Printer, printing speed up to 350mm/s. Compatible with Bambu Lab X1 and X1C/Creality K1 and K1 MAX/AnkerMake M5/Voron 2.4 /Flsun V400/Creality Ender 7 and K1 K1 MAX/ Raise 3D Pro 3 and RMF500.
- 【High Speed Printing & Fast Cooling】Excellent Fluidity and controlled viscosity factor avoid excessive stringing and sagging. Under same model and printing time, High Speed 3D Printer with Rapid PLA can print 3-5 times faster at high speed of 300mm/s than Normal Speed 3D Printer with Ordinary PLA at low speed of 50mm/s.
- 【Stable Dimensional Tolerance】Rapid PLA has high fluidity and low specific heat capacity, allows for rapid heat absorption and rapid melting, easy to cool after extrusion. It can maintain the printing quality and retain the integrity of the fine structure while High-speed printing.
- 【High Precision & Smooth Extrusion】Compared with ordinary PLA filament, PLA-HS has better printing effect, higher precision, good layer bonding, no deformation, less brittle and not easy to break. Melt well, feed smoothly and constantly without clogging the nozzle or extruder, high printing successful rate.
- 【Environmentally Friendly Packaging】Cardboard Spool packaging, lightweight and recycle, better protect the environment. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt.
Creality Ender PLA Filament 1.75mm 3D Printer Filament, 2kg Cardboard Spool (4.4lbs), Dimensional Accuracy +/- 0.03mm, Fit Most DIY Printer (White*1KG & Black*1KG)
- 🤗 COST-EFFECTIVE VALUE PACL EVER - This value pack is the most cost-effective filament we release in 2023, the color is classic black and white, you can have 2 spools now just with one spool's money now! And you can just print whatever you want. Saving money but not inspirations!
- 🤗 CLOG-FREE & BUBBLE-FREE - Designed and manufactured with clog-free patent to guarantee a smooth and stable printing experience with these PLA refills. Complete drying for 24 hours before packaging and vacuum sealed with desiccants in PC bag.
- 🤗 LESS-TANGLE & STRONGER TOUGHNESS - Full mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible snap and line breaking; Larger spool inner diameter design makes feeding smoother. The Imported raw material upgrades with stronger toughness. It is not easy to break, meeting your demands for printing projects of functional parts with higher toughnes.
- 🤗 DIMENSIONAL ACCURACY & CONSISTENCY - Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these PLA filaments of 1.75 mm diameter, dimensional accuracy + / - 0.03 mm; 2 kg spool (4.4lbs).
- 🤗 HIGH COMPATIBILITY &100% ENVIRONMENTAL-FRIENDLY - Compatible with 99% FDM & FFF 3D printers (with heated beds) 3D Pen. Environmental protection, made from starch raw materials derived from renewable plant resources.
eSUN PLA+ Filament 1.75mm, Enhanced Toughness, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Polylactic Acid, Black
- 【Enhanced Toughness PLA+】PLA+ is an enhanced version of ordinary PLA. It has higher strength and better toughness, not easy to break. Made with starch raw materials derived from renewable plant resources, eco-friendly and non-toxic, no harm to to human and the environment.
- 【High Speed Printing】PLA+ meets the demands for high-speed printers and keeps outstanding performance at high speeds. And it also keeps all the advantages of PLA, easy to print, low shrinkage, no deformation, no cracking, high printing precision. Good layer bonding performance meets your demands for printing functional parts with higher toughness.
- 【Dimensional Tolerance +/- 0.03mm】eSUN PLA+ 3D printer filaments are produced with more precise specification. Minimum tolerance and low warping to ensure consistent feeding and stable prints, no bubbles, less stringing, extremely high printing successful rate.
- 【Tangle Free & No Plugging】Total Length: 340-350m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.
- 【High Compatibility】Compatible with Most of FDM 3D Printers, such as: Bambu Lab X1/X1C, Creality K1 /K1 MAX, AnkerMake M5, Prusa, MakerBot, UltiMaker, MK3, Ender 3, Flashforge, Raise3D, FLSUN V400, Voron 2.4. Widly used in machinery, electronic appliances, automobiles, decorations and COSPLAY.
- 【Vacuumed Sealed Packaging】Filament Net Weight: 1KG. eSUN filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
- Notice: PLA+ series will switch to cardboard spool, thus these two versions will be sent randomly recently.Sorry that the designation is not accepted.
Gratkit Silk Tri-Color PLA Filament，3D Printer Filament 1.75mm, -0.03mm, 1KG/Roll, Silk PLA Blue/Black/Purple
- 【Magic Tri-Color Effect】GratKit Magic Tri Color PLA has 3 colors in one strand of filament, turning out amazing Tri color change effect on prints;
- 【Silk Coextrusion PLA】GratKit Silk Coextrusion PLA shows Silk Shiny effect on printed stuffs, makes prints looks charming;
- 【Moisture Resistant Pro】GratKit 3D printing filament went through a 24-hour drying process in thermostatic room before sealed packing. Moreover, it gets environmental glue attached on reel to make sure the reel stands longer after unpacking.
- 【Dust Free Storage】GratKit PLA filament gets zipper bag included for for filament storage after unpacked to keep filament away from dust. It is also recommended to zip remaining filament together with desiccant bag in the zipper bag.
- 【Environmental Packing】GratKit PLA 3D Printer filament uses recyclable cardboard reels for environmental purpose.
Eono Dual Color PLA Filament Coextrusion Dual Color PLA Filament 1.75mm for 3D Printer, 3D Printer Filament Muliticolor Silk PLA Like Rainbow, 250g*4 Color Pack.
- 【Silk Dual Color PLA】Eono Silk PLA filament delivers an eye-catching and smooth finish, making your 3d prints stand out from the crowd. 4 color include: Matte Red/Blue, Silk Silver/Copper, Silk Pink/Blue, and Silk Blue/Green.
- 【Pack of 4 spools of 250g】 With this pack you don't need to choose. Enjoy a selection of the most beautiful dual extrusion PLA colors. Perfect for small projects, 3D pen or testing!
- 【Quality PLA Filament】Ensuring durability and excellent performance. Good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder.
- 【Multi Color PLA Filament】Produced with dual extrusion, unlike rainbow filament, this filament has two color along the whole spool, You can print beautiful multicolors in one PLA filament bundle, silk glossy smooth appearance, perfect for arts, crafts, DIY. Beginner & expert friendly
- 【High Compatibility Filament】Shiny silk PLA filaments of 1.75 mm diameter. Accuracy +/- 0.02 mm. 200g X 4 Spools. Shiny silk color change PLA filament is perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, DO3D, MYNT3D, 3Doodler. Printing Temperature 200-220℃. Printing Bed (Optional) 0-60℃
- 【Profesional-Grade Packed】The spools are dried and then vacuum packed to preserve the filament between uses. All the products are hand-checked and come with a guarantee. If something goes wrong, just contact us.
TECBEARS PLA+ Filament 1.75 mm, Upgrade Pla+ More Robust and Stronger 3D Printer Filament 1kg Spool, Max 300 mm/s Printing Speed, Dimensional Accuracy +/- 0.02 mm, PLA+ Black
- 【ENHANCED TOUGHNESS AND STIFFNESS】PLA+ 2.0 filament boasts a higher flexural modulus and elongation at break compared to standard PLA+, making it more resistant to brittleness and cracking. Ideal for functional parts.
- 【0-300MM/S PRINT SPEED】Suitable for print speeds from 0-300mm/s, PLA+ filament allows you to complete your projects faster, perfect for both regular and high-speed 3D printers.
- 【GLOSSY SURFACE & RELIABLE ADHESION】PLA+ 2.0 filament provides excellent layer bonding for a smooth, glossy surface finish without delamination. Its low shrinkage ensures firm bed adhesion, preventing warping and detachment.
- 【NO CLOGS, NO BUBBLES】With a diameter tolerance of +/- 0.02 mm, PLA+ filament ensures consistent feeding and smooth extrusion, preventing nozzle clogs. Each spool undergoes 24-hour drying and is vacuum-sealed in resealable packaging.
- 【TANGLE-FREE WINDING】With a total length of 330m, PLA+ 2.0 filament is precisely wound to minimise tangles and line breaks. Includes filament cord clips to keep your filament secure and tangle-free.
ANYCUBIC PLA Filament 1.75mm, 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 1KG Spool
- 【Accuracy and Consistency】 Anycubic 3D Printer PLA filament of 1.75mm diameter, minimum dimensional tolerance +/- 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- 【Neat Spool and Premium Quality】 The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
- 【Clog-Free and Bubble-free】 Designed and Manufactured with a Clog-Free to ensure a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
- 【Wide Compatibility】 Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and even does not need a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market
- 【Filament Installation】 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk
SUNLU PLA+ 3D Printer Filament, PLA Plus Filament 1.75mm, Toughness Enhanced 3D Filament Compatible with 3D FDM Printers, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool(2.2 LBS), pla+ Black
- SUNLU 3D PLA Plus filament: SUNLU PLA plus has a higher toughness than normal PLA. Say goodbye to brittle filament. SUNLU PLA+ filament has high strength, excellent adhesion, lower shrinkage, no bubbles, no clogging.
- Cleanly arranged lines: Sunlu's neatly arranged filament technology can avoid winding, twisting or separating filaments during printing, reduce the risk of 3D printing plugs and make your printing smoother.
- Clog-free, bubble-free: the better flow of the SUNLU 1.75 mm PLA+ filament no longer clogs the bed probes of 3D FDM printers. PLA Plus filament has no impurities, no bubbles and the printing process is smooth, so shiny 3D prints are possible.
- High precision +/- 0.02 mm: PLA+ 3D printer filament has 1.75 mm diameter, accuracy +/- 0.02 mm; 1 kg spool (2.2 lbs). It has a very tight diameter tolerance and perfect roundness as well as minimal deformation. Increase the fineness of your 3D printed objects.
- High compatibility and vacuum packaging: compatible with 99% FDM 3D printers and 3D pen. The vacuum-packed SUNLU PLA PLUS filaments ensure better printing results. PLA+ filament is made from starch raw materials derived from renewable plant resources.
SUNLU Silk Filament 1.75mm, Shiny PLA 3D Printer Filament, PLA+ Silk 3D Filament, Dimensional Accuracy +/- 0.02 mm, 1KG Spool (2.2 lbs), Silk Light Gold 1KG
- ①【SUNLU Silk PLA+ Filament】SUNLU Silk PLA 3D printer filaments are stronger and have a glossy, smooth and silky surface that does not require any polishing. High quality SUNLU pla+ silk filament has a variety of beautiful colors to meet your 3D art and craft printing needs with a silky glossy finish.
- ②【Stable and Uniform】1.75mm pla+ silk filament for 3D printer has a dimensional accuracy of +/-0.02mm, the minimum tolerance and precision of pla plus silk filament ensures a consistent feeding process and regular without obstruction.
- ③【High Quality】SUNLU hard pla silk filament has smooth texture, smooth extrusion, strong layer adhesion and good build plate adhesion, no deformation, no odor, low shrinkage, and easy to print with a beautiful rendering and high quality silky finish.
- ④【Neatly Wound Filament】SUNLU is committed to strictly controlling the winding of 3D printing filament, to avoid tangling in 3D printing, ensure that 1.75mm PLA silk filament does not get tangled and that the printing is smooth, Effectively reduce the problem of printing breakage.
- ⑤【High Compatibility】1.75mm silk pla 3d printing filament is compatible with most FDM 3D printers, 1kg(2.2lbs) spool, 330m per spool. Printing temperature: 205-215℃; Hot bed temperature: 60-80℃; Printing speed: 30-60MM/s.
Published date: 2024-06-25 13:39:34