ELEGOO

Last updated: 05 Oct 2019, 03:22
Two pages on our website with products by 'ELEGOO':

    The following products are available from 'ELEGOO':

    ELEGOO UNO R3 Project The Most Complete Ultimate Starter Kit Compatible with Arduino IDE w/TUTORIAL, UNO R3 Controller Board, LCD 1602, Servo, Stepper Motor

    • More than 200 components, this is the most complete starter kit. Great value starter kits with 63 kinds of products.
    • Has all the products you need for your projects and a free PDF tutorial (more than 30 lessons) to show you how to use them. All code to use the modules is included on the CD
    • All the modules come soldered so they are easy to wire up.
    • Includes UNO R3 controller board and USB cable. This kit is compatible with Arduino IDE project.
    • Kit comes with a package of compartmentalized case with a bonus box for small parts like LED's, IC's, buttons, diodes, etc.

    ELEGOO UNO R3 Project Super Starter Kit Compatible with Arduino IDE with Tutorial, 5V Relay, UNO R3 Board, Power Supply Module, Servo Motor, Prototype Expansion Board, etc. for Beginner

    • PDF tutorial (more than 22 lessons) and clear listing in a nice package.
    • The most economical way to starting programming for those beginners who are interested.
    • LCD 1602 module with pin header (No need to solder by yourself).
    • This is the upgraded starter kit with power supply module, 9V battery with DC.
    • High quality kit compatible with Arduino UNO R3.

    ELEGOO Mega 2560 Project The Most Complete Ultimate Starter Kit Compatible with Arduino IDE w/TUTORIAL, MEGA 2560 R3 Controller Board, LCD 1602, Servo, Stepper Motor

    • The MEGA 2560 complete starter kit with more than 200pcs components and it is 100% compatible with Arduino IDE.
    • Free PDF tutorial in the CD (more than 35 lessons). LCD1602 module and GY-61 sensor module with pin header ( no need to solder by yourself). You can also download the same tutorials online from our official website.
    • Nice package with clear listing and surprise including a nice small box to keep the widget such as LED , IC , buttons , diodes ,etc.
    • Warning Tip: The input voltage of ELEGOO Power Supply Module is 6.5v - 9v (DC) via 5.5mm x 2.1mm plug. Please DO NOT over charge it otherwise it will burn your board and chips.
    • Note: To use ELEGOO starter kits requires basic electronic knowledge. If the user has no experience, it would be better to have someone lead and teach them while studying.

    ELEGOO LCD UV 405nm ABS-Like Rapid 3D Resin for LCD 3D Printer 1000g Photopolymer Resin Grey

    • 【Low Shrinkage and High Precision】ELEGOO photopolymer resin contains methacrylate monomers as to reduce volume shrinkage during the Photocuring process , which ensures the high precision of the print model with smooth finish. Recommended printing parameters: Bottom Exposure: 60s; Normal Exposure: 8s
    • 【Fast Curing and Great Stability】ELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness guarantee a worry-free printing experience.
    • 【Bright and Stunning Colors】: With high quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork.
    • 【Wide Applications】Giving the outstanding performances, ELEGOO standard resin is suitable for most DLP or LCD 3D printers for fast prototyping with toys, home and garden tools or jewelry applications.
    • 【Safe and Secure Packaging】Leak-proof bottle fully wrapped with a plastic bubble bag and exquisite designed package box make sure the resin stays in place where they belong

    ELEGOO UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable Compatible with Arduino IDE Projects RoHS Compliant

    • High-quality UNO R3 controller board functional compatible with Arduino IDE
    • ELEGOO UNO R3 board uses an ATMega16U2 as a Serial interface Chip and an ATmega328P as a Microcontroller Chip making it more faster in transfer rates and better at storage and operation with more memory store
    • Supports USB 5V Input and 7V -12V DC Input and if you are working on small projects we suuggest you use 9V1A Input to get a more stable user experience
    • A PTC resettable fuse could protect your board from shortcut caused by incorrect wiring
    • I/O interface name and function are indicated on the flank of the Female Header Connector making it much easier for wiring

    ELEGOO Smart Robot Car Kit V3.0 Compatible with Arduino IDE with UNO R3 Board, Line Tracking Module, Ultrasonic Sensor, IR Remote Module Intelligent and Educational Toy Car Robotic Kit for Kids Teens

    • ELEGOO Smart Robot Car: An educational kit for beginners (kids) to get hands-on experience about programming, electronics assembling and robotics knowledge. It is an integration solution for robotics learning and it works for education and Arduino IDE projects.
    • Complete Package: Contains 24 kinds of module parts including obstacle avoidance, line tracing module, infrared remote control and also you can control it via phone and tablets of Android and iOS system, etc.
    • Easy to Assemble: All the module interface has been modified with XH2.54 ports as to make it much easier and convenient to assemble the car and reduce the chances for errors.
    • Refined Tutorial in CD: HD rendering instructions on how to assemble the robot car from scratch and all the necessary programs and codes are included. You can also download the same tutorials online from our official website.
    • Upgraded Package Design: More minimalism design and make it a perfect gift for your kids and friends. Applicable Age: 12+

    ELEGOO Upgraded Electronics Fun Kit w/Power Supply Module, Jumper Wire, Precision Potentiometer, 830 tie-points Breadboard for Arduino UNO R3, MEGA 2560, Raspberry Pi, STM32, Datesheet Available

    • The most complete electronic component kit to build up your electronic project
    • With more than 300pcs components improved according to customer suggestions
    • Compatible with raspberry pi starter kits and Arduino IDE project. Please be noted that controller board is not included in this kit.
    • Great quality and packing in a plastic box.
    • Datasheet is available to download from this link: http:/bit.ly/2jKlJMO

    ELEGOO MARS UV Photocuring LCD 3D Printer with 3.5" Smart Touch Color Screen Off-line Print 4.72"(L) x 2.68"(W) x 6.1"(H) Printing Size-Silver

    • 【Smart and Fast Slicing Software】ELEGOO Mars comes with the latest version of ChiTu Box Slicing Software which gives you extraordinary user experience. ChiTu Box takes only 1 minute to slice 30Mb .stl model files while the open-sourced slicing software would take up to 10minutes.
    • 【Resin saving and Better Printing】ChiTu Box allows you to hollow out your model before slicing which could save your resin dramatically during photocuring process. Equiped with 40W UV lights and using ELEGOO resin, you can get a better pritning result.
    • 【Smart and Convenient】3.5'' inch color touch screen equipped with the latest ELEGOO ChiTu 5.0 system makes it very easy for off-line printing. The build platform with steel ball balancing structure inside allows you to start printing within 5 minutes after assembly.
    • 【High Precision and Resolution】ELEGOO Mars uses a 2560x1440 2K HD masking LCD as to provide accurate printing with XY axis resolution of 0.00185inches / 0.047mm
    • 【Warranty and Service】We provide total one-year machine warranty (5.5'' inch 2K LCD excluded) and if you have any questions regarding product operation or software please feel free to contact us. Have a look at the video of the introducing of our MARS here: https:/www.youtube.com/watch?v=y3DO-Wbwju8 and other helpful videos from our channel: https:/www.youtube.com/channel/UCVpdrdIwslr7vVdPNYID9rA

    ELEGOO Upgraded 37 in 1 Sensor Modules Kit with Tutorial Compatible with Arduino UNO R3 MEGA 2560 Nano Raspberry Pi

    • Updated from the old version (others): Received great ideas from our customers and adopted in this upgraded kit.
    • Removed useless modules like light cup and mercury module,heartbeat sensor, two of the hall sensors, one of the dual-color sensor. Add useful modules like GY-521 accelerometer module, LCD1602 screen, DS3231 real time clock module etc.
    • Upgraded tutorial only for UNO R3, MEGA 2560 R3, NANO in CD. There are tutorials in the CD that comes with. If you prefer download the tutorials online, please go to this link to download the same tutorials: http:/bit.ly/2jKlJMO
    • 100% compatible with Arduino IDE, Raspberry Pi and STM32.
    • Note: To use ELEGOO starter kits requires basic electronic knowledge. If the user has no experience, it would be better to have someone lead and teach them while studying.

    ELEGOO For Arduino Nano V3.0, Nano board CH340/ATmega328P, compatible with Arduino Nano V3.0 (pack of 3) ...

    • The Nano is 100% compatible with Arduino, using the same chips ATmega328P and CH340 with the official version.
    • It is a smallest, complete, and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.
    • Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
    • The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
    • You could download the driver of Elegoo Nano V3.0 at: http:/bit.ly/2jKlJMO

    Also see: