- 1. Fast 3 steps Self-assembly: Just takes about 10 minutes to install the Z-plane kit on the XY plane and wiring. Simple and convenient.
- 2. With its build volume as 220*220*260mm³, A10 makes the best of the building platform and gives you a full view of the printing details.
- 3. Good Adhesion of Building Platform: Building platform without the need of attaching the masking tape. Freeing you from the headache of first layer warping
- 4. Filament detector: The filament detector eliminates the pain caused by the breaking or breaking of the filament. The detection system will warn you to change the filament if the printer is running in the air or the coil is empty. This additional gadget would avoid printing without starting and improving print satisfaction.
- 5. Break Resume :The restore pause function provides A10 to save the print status in real time and resume the print job exactly where it left off. This feature completely eliminates the hassle of repetitive and boring printing caused by a sudden power outage. Eliminate the hassle of printing large 3D models.
- 1. 1kg spool 1.75mm filament PLA in vacuum packing
- 2. No impurities, no clogging
- 3. Recommended temperature: 180-210 ℃
- 4. Diameter tolerance +/- 0.02mm
- 5. Environmental-friendly, Made from starch raw materials derived from renewable plant resources
- 1,Mix-color printing: Dual extruder module and 2-in-1-out hotend which delivers mix-color objects and greatly enriches your 3D printing life
- 2,Fast Self-assembly: Just takes about 10 minutes to install the Z-plane kit on the XY plane and wiring. Simple and convenient.
- 3,Large printing area: With its printing area as 220*220*260mm³, A10M makes the best of the building platform and gives you a full view of the printing details.
- 4,Extruder cover features 360°ventilation design: Enhancing the dissipation of heat, greatly reduces the risk of clogging or leaking and guaranteeing excellent printing quality,
- 5,Good adhesion of printing plate: A10M building platform without using Bluetape (Masked Tape). It has excellent adhesion and thus frees from the problem of detaching the first layer.
- 1. Excellent adhesion: Superplate is coated with micropores, having strong adhesion during printing.
- 2. Reliability: The special coating is inorganic, with its hardness of 8 Mohs and heat resistance up to 400 ℃.
- 3. Easy to clean with water or alcohol.
- 4. Easy to remove your print by hand or with a scraper.
- 5. Size: 220*220*4mm
- 【vacuum packing】1.75mm 3d printer filament PLA in vacuum packing 1kg spool
- 【High Precision +/- 0.03mm Tolerance】 Perfect roundness and very tight diameter tolerance, approximately 330m of filament on each spool, no warping, no odor,no clogging, no bubbles.
- 【Tangle Free & No Plugging】Consistent diameter & roundness, less stringing and warping, strong layer adhesion.
- 【Environment friendly】Made from starch raw materials derived from renewable plant resources.
- 【Money Back Guarantee】If you are not satisfied with the quality, contact us on time，we accept return or refund.
- 【1】Mix-color Printing: Dual extruder module and 2-in-1-out hotend which deliver 4 types of printings, namely, single color, dual color, graded color and mixed color. A10M will greatly enrich your 3D printing life
- 【2】Large Printing Volume: With its printing area as 255×255×255mm³, A20M makes the best of the building platform and gives you a full view of the printing details.
- 【3】Fast Self-assembly: Just takes 3 steps to install the upper gantry kit on the integrated building base and wiring.
- 【4】Filament Detector and Breaking-resuming Capability: It can continue to print from the same place where it stops, regardless of unexpected power failure, stopping to change the filament, stopping and print tomorrow. Filament Detector will also automatically pause when filament runs out.
- 【5】Integrated Building Base: The profile of building base is relatively solid. The most weight is on this base. This unique design allows the entire machine to run more stably when printing.
- 1.75mm PLA, 1kg per Spool,approximately 2.2lbs.
- Vacuum sealed packaging,keep it dry and keep dust and debris out, prevent jams.
- High precision +/- 0.03 mm Tolerance,approx. 330 m filament on each bobbin,no odor, no clogging, no bubbles.
- Recommended Extrusion/Nozzle Temperature 190-220 ℃.
- Environmental protection, Made from starch raw materials derived from renewable plant resources.
- 1.75mm PLA, 1kg Spool,approximately 2.2lbs.
- Recommended Extrusion/Nozzle Temperature 180°C - 210°C (356°F - 410°F).
- It has a great silk structure. This looks very smooth and obscures the lines and imperfections. Perfect for craft projects, vases and other 3D printed matter.
- It is carefully vacuum packed and desiccant to ensure low moisture content. Keep dry to prevent dust.
- High precision +/- 0.03mm tolerance: 1kg 3D printer filament coil, perfect roundness and very tight diameter tolerance, each bobbin is about 330 meters long.
The following products are available from 'GEEETECH':
GEEETECH A10 3D Printer Aluminum Prusa I3 Half Assembled DIY Kit with Print Size 220×220×260mm,OPEN SOURCE GT2560 control board
GEEETECH A10M 3D Printer with Mix-color printing, Dual extruder design, Filament detector and Break-resuming function, Prusa I3 quick assembly DIY kit.
GEEETECH Superplate 3D Printer Glass Platform with High-performance Microporous Coating, 235 * 235 * 4mm for 3D Printer Heatbed
PLA Filament 1.75mm Black, GEEETECH New 3D Printing Filament PLA for 3D Printer and 3D Pen, 1kg 1 Spool
GEEETECH A20M 3D Printer Quick Assembly DIY kit with Mix-Color Printing, Break-resuming, Large Printing Area: 255×255×255mm³
PLA Filament 1.75mm, Silk Style Filament, Geeetech 3D Printer Shine PLA Filament,1kg per Spool,Silk Gold